Hakrc storm32
List hakrc storm32
-
storm32 board version: v 1type: fpv fittings
48 €
-
(8) each axis can be connected to support the analog joystickthe black sensor board is a mini version that can be mounted in an embedded design(13) ptz dual mode switching: follow mode and lock modethis function can be used by the slr handheld pan/tilt
15 €
-
Drive current: maxprocessor: stm32f103rc at 72mhzeach axis could connect analog joystickmotor driver: drv with short circuit, overheat protection
17 €
-
Safety tip: don't fly near the crowdtry to fly inside the house to avoid a safety accidentbefore installing the propeller test, check again that the engine is turning and the propeller is in the correct direction
21 €
-
Bec: 5v / 3a; 9v / 2instructions for use (mandatory):1the correct way is to press the nut with your finger, and the screw driver can ly tighten the screw at the bottom (don't be too tight to avoid damaging the pcb board)
20 €
-
Hardware pwm, damped light: the hardware pwm drives the motor with low noise and smoother throttle response
21 €