Sub output impedance 1k

List sub output impedance 1k

  • output muting cuts the signal from the di output but leaves the tuner output 'live', allowing the player to tune up in silence9m ohms input range 150mv - 20v p-p low instrument input impedance 10k ohms input range 300mv to 40v p-p line input impedance 22k ohms, inout level 0dbu sub output impedance 1k ohms, level 0dbu nominal di output 600 ohms balanced, level 0dbu nominal tuner output impedance 22k ohms, level 0dbu eq bass +/- 15db @45hz middle +/- @ 660hz treble +/- 15db @7khz effects send impedance 22k ohms, level 0dbu nominal effects return impedance 22k ohms, input level 0dbu nominal the combo delivers its payload via a single 15" driverspecification power output 325 watt power handling v speaker outputs minimum impedance 4 ohms frequency response -3db at 17hz and 30khz high instrument inpput impedance 3also footswitchable is the mighty ashdown sub-harmonic generator which precisely tracks the main signal and reproduces it an octave lowera new upgraded power section has faster transient attack, more headroom and even less noisea sub-harmonic level control enables the player to add just the right amount of low-end reinforcement - everything from a subtle, thickening of the sound to unbridled, bone crushing tonea single input is switchable for passive and active instruments with a blend of solid state and dual triode tube preamps stages which can be preset and selected by footswitch, providing access to a massive range of clean, warm and overdriven tonesthe eq can be switched in/out, and flat/shaped by footswitch, enabling players to go from a flat fretless sound to a boosted sound via a favourite eq settingthree straightforward rotary tone controls provide 20db of cut and boost at 60hz, 660hz and 5khz, and are supplemented by two pairs of additional sliders giving 15db cut and boost at 180hz, 340hz, 1the abm 300 evo ii features a front-panel mounted balanced di out with pre or post eq switching, a sub-bass output, a tuner output, an fx loop and a line input for the connection of an external sampler or sound sourcethe ashdown abm 300 evo ii bass guitar amplifier (300 watt) combo the abm 300 evo ii is a 325 watts rms bass combo amp designed to satisfy both bass-purists and tech-heads alike

    120 €

  • output impedance: 1k ohms lessinput impedance: 1m ohmscurrent draw: 51 dst-501 distortion pedal

    23 €

  • output impedance: 1k ohms lesscurrent draw: 51 dst-501 distortion pedal)1x(input impedance: 1m ohms

    22 €

  • Great tones from jazz to heavy rock collection is from harrow n/w london downsizing my collection please check out my other listing too laney - lc30 mkii class a 30 watt tube/valve combo lc30-ii maximumpower consumption 100watts supply voltage (factory pre-set) volts supply frequency hz output power 30 watts input impedance hi & lo 1 meg ohm fx loop level (nominal) 0db fx send/return impedance 1k/100k ohm speaker impedance 8 ohm extension speaker 8 ohm speaker size mm speaker rating 50 watts size h xw x d 445x565x245 read moreamplifier works perfectlylightly used, just been sat in the corner of the studio for the last 15 years no issues with the handle, construction, amplifier or speakerlaney - lc30 mkii great sounding tube amplifier

    200 €

  • Aptx audio outputs:- sub woofer out (20 hz~850 hz) power supply: ac 230 v/50 hz - ac115 v/60 hz dimensions: h: 148 mm w: 264 mm d: 215 mm weight: 318% signal to noise ratio: 88 db 'a'-weighted / 66 db flat input impedance: 50ko input sensitivity: 580mv +/- 5% at 30w output impedance: 4 / 8 o vacuum tube type: 2 x ecc82, 1 x 6e 2 audio inputs:- 1 x rca 1 x usb micro b 1 x 3response: 23hz – 100khz +/- 2 db harmonic distortion: 30w/0lovely smooth valve sound, 5* reviewsthis is the limited edition version with lacquered walnut finishcan demonstrate if required specifications:- amplifier type: class a/b power output: 30ww per channel freq5 kg accessories included:- remote control rca - 35 cable usb (mini) cable line out cable (3if i had room for another setup i'd be keeping itx bluetooth for high quality streaming from phone/tablet or server stored music5 mini jack) lint free dusting cloth mains lead also have available 2 sets of bookshelf speakers either if required at additional costpick up after demonstration preferred but will deliver within 10 miles radius of my location postage extra at additional cost but insurance must be taken for full valueonly approx 4 hours use so barely run inin as new condition with all accessories and packagingusb input high quality dbeautifully designed hybrid valve / solid state amplifier5 mm mini jack bluetooth 4genuine reason for sale

    400 €

  • output: 1/4″monaural jack (impedance: 1k ohms)product introduction donner equalizer pedal frequency centers: 100hz, 250hz, 630hz, 1input: 1/4″monaural jack (impedance: 470k ohms)6 khz, and 4 khz

    43 €

  • 9m ohms, input range 150mv - 20mv p-p low instrument input: impedance - 1m ohms input range 150mv to 10v p - p line input: impedance 10k ohms, input range 300mv - 40v p-p di output: 600 ohm balanced / level -20dbu nominal tuner output: impedance 22k ohms / level 0dbu nominal impedance: minimum 4 ohm effects send: impedance 22k ohm / level 0dbu nominal effects return: impedance 22k ohm / level 0dbu nominal distortion: less than 0power output: 800 watts power handling: volts speaker outputs: 2 x speakon frequency response: -3db at 17hz and 30khz high instrument input: impedance 3as new, never gigged, no flaws5% thd h x w x d (mm): 86 x 314 x 235 weight (kg): 5kg purchased for ÂŁ for gig bag! read moreincludes ashdown rm-gig bag – carry bag for rootmaster amps

    450 €

  • 30 watts per channel output into 4 or 8 ohms (selectable)pre·amp section: phono input: input impedance (r and c): 47kohms/100pf input sensitivity: mm1 khz: 25db line level outputs: output impedance: preamp 800 ohms tape source z + 1khz ohms maximum output level: preamp 8v tone controls: treble: ±7db at 10khz bass: ±7db at 100hz bass eq: +3db at 70hz +6db at 40hz -3db at 12hz - 12db/octave power amp section: continuous output power into 8 ohms: 30w(15dbw) rated distortion (thd 20hz - 20khz) 0nad c540 specifications disc format: cd digital converter: sigma delta, 24 bit, 8 x oversampling frequency response: 5hz to 20khz dynamic range: 96db signal to noise ratio: 108db channel separation: 80db total harmonic distortion: % line output: 25v mc 1 khz: mc 200 mv signal to noise ratio: mm 76db ref9kg minimum power 30 wrms per channel, 20hz - 20khz, both channels driven with no more than rated distortion5mv riaa response accuracy: ±05db line level inputs: input impedance: (r and 0) 15kohms/100pf input sensitivity (refthe nad is a 30 watt per channel integrated amplifier1kg accessories: remote control read morelw): 150mv maximum input signal: 10v signal/noise ratio (a-weighed ref lw):85db frequency response: 20hz - 20khz / ±05mv mc 76db ref03% clipping power (maximum continuous power per channel): 45w ihf dynamic headroom at 8 ohms: +3db ihf dynamic power (maximum short term power per channel): 8 ohms 60w 4 ohms 70w 2 ohms 85w input impedance: 22k ohms input sensitivity (for rated power into 8ohm): 850mv physical specifications: dimensions (w x h x d) 17x15x5 net weight: 6switchable to 2 sets of speakers (a or b) or (a and b)2v digital outputs: coaxial dimensions: 435 x 70 x 285mm weight: 4

    150 €

  • 9m ohms, input range 150mv - 20mv p-p low instrument input impedance 10k ohms, input range 300mv - 40v p-p line input impedance 10k ohms, input range 300mv - 40v p-p tuner output impedance 22k ohms, level 0dbu nominal di output 600 ohms balanced, level -20dbu nominal impedance minimum 4 ohm eq bass +/-15db 100hz lo mid +/-15db 220hz middle +/-15db 660hz hi mid +/-15db 1head: power output 300 watts power requirement v speaker outputs 2 x jack sockets frequency response -3db at 17hz - 30khz high instrument input impedance 36khz treble +/-15db 7khz shelving deep + h x w x d (mm) 90 x 463 x 267 weight (kg) 85 cab: power handling: 200 w 8 ohm equipped with: 2x 10" loudspeakers + tweeter frequency range: hz dimensions: 468 x 604 x 420 mm weight: 29 kg read morepick up only from birmingham b36 due to size and weightused amp and matching 2x10 cabinet, both previously gigged with some scratches and scuffs

    200 €

  • output level: dbu sensitivity: -3310 inches frequency response: 60 hz - 18 khz output impedance: ohms max5mm trs, lockable (compatible with micon-1) output impedance: 10 kohms dimensions: 111 x 65 x 40 mm weight: 190 grams lavalier microphone: pickup pattern: omnidirectional type: condenser cable: 3 m, kevlar capsule: 0product specifications: compact wireless lavalier system for camera contents: beltpack transmitter (tx-belt) receiver with camera fastening (rx-cam) high-quality lavalier microphone windscreen and furry wind shield mini jack trs output cable (to camera) storage pouch frequency band: 25 mm trs, lockable, dual mono output impedance: 300 ohms oled screen: volume level battery status (transmitter and receiver) mute channel selection dimensions: 111 x 65 x 52 mm weight: 190 grams tx-belt transmitter: can be fastened to clothing or belt power supply: 2x aa battery or micro usb battery life of up to 10 hours 4v plug-in power for microphone internal antenna gain control (3 levels) input: 35 db self-noise: 25 db-a dimensions: 12 x 4spl: 110 db max5 mm weight: 1 g read more4 ghz, series ii, digital transfers range: up to 100 m 8 channels easy pairing dynamic range 112 db frequency range system: 35 hz - 22 khz maxlatency: 4 ms 128-bit encryption rx-cam receiver: can be fastened to camera shoe, 3/8-inch screw thread or belt clip two positions for shoe mount power supply: 2x aa battery or micro usb battery life of up to 10 hours internal antenna gain control (3 levels) output: 3

    190 €

  • Power outputs at rated v supply voltage 125 w rms both channels driven into the rated load of 8 o 156 w rms both channels driven into 6 o record outputrecord output level (with rated input levels) 219 mv record output impedance 560 opre-amp output impedance 100 o dimensions (w x h x d) - 433 x 95 x 360 mm (including speaker terminals) weight - 17collection only, auditioning possibleoriginal box, manual and remote control included5 kg i bought this amp in march - in need for cash now, so i have to sell itin perfect working condition, great soundrega aethos stereo amplifier

    2245 €

  • However, it has 10ohm output impedance, which isn’t ideal for low impedance iems or headphones4mm output port especially designed for ibasso dx200 and ibasso dx150 music playersibasso amp8 is a fully discrete balanced amp with a 4

    399 €

  • Kef kht speakers front speakers (x2) centre speaker (x1) rear speakers (x2) sub woofer (x1) rear speaker stands (x2) perfect working order and in very good condition product features exterior color - silver peak power handling - 100w sensitivity - 86db nominal power - 100w outdoor/indoor - indoor impedance - 8 ohm frequency response - 120hz-30khz rms power - 100w read more

    95 €

  • 5% * - output level: 750 mv at 70% modulation general * - output impedance: 100 ohms * - minimum recommended load: ohms * - dimensions: … width: 430mm … depth: 290mm … height: 85mm, weight 425% * - channel separation ( hz): better than 38 db * - pilot tone suppression: better than 30 db * output level: 700 mv at hz deviation am section * - tuning range: 522 to mhz * - tuning system: phase locked loop * - frequency steps: hz * presets: 8 * - usable sensitivity: typically 25 mv * if rejection: 20 db * s/n ratio (30% mod16 presets 43cmx28cmx8cm5 to mhz * - tuning system: phased lock loop * - frequency steps: 50khz * - presets: 16 * - sensitivity (ihf) for 50db s/n ratio: typically 8 mv * - alternate channel selectivity: better than 60 db * - am suppression ratio: better than 50 db * - capture ratio: typically 15khz deviation 1khz): … mono: better than 0details for shipping: 62 x 45 x kgs manufacturer specifications: fm section - tuning range: 870 db * - on-tune indicator: lights at tuned frequency +/- 50 khz * - frequency response: 20 hz – hz +/- 1 db * - s/n ratio … mono: better than -76 db … stereo: better than -71 db * - total harmonic distortion (96 mhz ref68 kg unpackaged read morearcam alpha 8 am/fm tuner in perfect condition and working ordercomplete with manual, power cable and original box1% … stereo: better than 050 mv i/p): 50 db * - total harmonic distortion (30% mod

    55 €

  • output impedance: 8 ohms best (can drive ohm impedance speakers)when aux is inserted, bluetooth will break, aux priority, audio is input, mixedamplifier chip: tdap (with the letter p is a dual-channel 25-watt 25w + 25w)audio input: bluetooth receiver

    8 €

  • output impedance: 200 o +/- 30% (at 1 khz)signal-to-noise ratio: 77dbsensitivity: -38 db +/- 2 db (0 db = 1v / pa at 1 khz)pick-up pattern: cardioidcharge impedance: = ofrequency response: 20 hz - 20 khznoise level: 17db (weighted a)bird em2 studio condenser microphone cardioid with spider mount and wind cap fully functional, barely usedrequires phantom powercomes without cablemaximum sound pressure: 136db (at 1khz = 1% thd)

    49 €

  • Note: spec  input impedance: 1 mω output impedance: 100 ω s / n ratio: 110 db frequency response: 20 hz to 20 khz maximum input level: + 8 dbu dsp performance: mega flops accessory: dedicated power supply made in usa shipping economy shipping sal (registered air small mail) standard shipping expedited shipping express mail service (ems) insurance: full insurance payment i accept paypal onlyabout us please see goods, thank youenjoy shopping !! -- caution for mexican buyer -- **about return**i'm japanese living in japandescription condition: brand new manual: japanese 100% genuine product japan usage itemour products are 100% authentic! i am sorry for poor english

    278 €

  • output impedance: 10k ohmsinput impedance: 500k ohms1 guitar effect pedal

    23 €

  • output impedance: 1output cable: attached with 3product code:a35gbattery current drain: 0dynamic range: 66dbsignal-to-noise ratio: 60db (1khz @ 1pa)power supply: 1included accessories: camera hot-shoe mic holder, windscreendimensions: 177mm long – 18sensitivity: -40db @1khz (1v/pa)battery life: 400 hours with alkiline batteryweight w/o battery: 52gazden smx-10 technical specification: type: stereo electret condenserpower source: aaa batteryfrequency response: hz5vdc (“aaa” size battery)

    45 €

  • 300watt output, full 4 channel stereo mixer, 7 band graphic, mic input with fx for all channels, rca input, sub output, di output, fx defeat inputbehringer kfx keyboard/pa amplifiergreat sounding amp with lots of featurescomes with custom cover

    160 €

  • output impedance: 05mm output port (unbalanced)five digital filterscowon plenue v (pv) hi res dap

    279 €

  • Input and output impedance is 50 ohmsso239 input and outputin excellent used condition with original box, packing and instructionsprefer local inspection collection but post may be possiblemeasures approx 9insertion loss is less than 0maximum input power is wattsattenuation is advertised as more than 90 db between 90 and 300 mhzweight approx 1the kenwood lf-30a is a low pass filter with cutoff frequency of 30 mhz

    39 €

  • In addition, there is a separate mono output and 2 subgroup outputsapplications: live sound: bands, small venues, schools, conference, houses of worship studio recording: digital/analogue multitracking (4/8 track), small/home studios, pre- and post-production submixing location sound key features: 20 inputs as standard 18 outputs including aux and direct outputs 12 mono channels with high quality ultramic™ pre-amps 4 stereo inputs 4-bus architecture, with sub-group routable to mix direct outputs can be switched globally pre- or post-fade inserts on all mono channels 3-bands 'british' eq with swept mid-band stereo 18db/octave 100hz high-pass filter to cut stage rumble +48v phantom power channel on switch for mute control two sub-group outputs separate mono sum output impedance balanced outputs rugged aluminium chassis with integral carry handle excellent protection against rf emissions read more100mm faders are used through giving more accurate control at mixdown and all pots have been custom designed to give even and consistent response around the entire sweepbuyer to collect or arrange courier service12 mic/line inputs are equipped with soundcraft's ultramic™ preamp giving a full 60db or gain range and +22dbu of headroom, meaning that the sx input stage can handle any mic or line devicethere are also four stereo inputs for keyboards or other stereo instrumentsin addition to mix outs, two sub-buses allow groups of instruments to be sent to multitrack, to additional speakers, or sub-grouped to mixthere are 2 auxiliary sends, 2 of which can be assigned pre- or post-fader making them equally useful for monitor-heavy live mixes or effects-heavy recordingit includes 20 inputs as standard and 18 outputs (including auxs and direct outs)sx's 8 direct outs are fader pre/post switchable so they are equally useful for recording in the studio or at a gigspirit sx is a flexible 4-bus mixer capable of producing digital sound quality for both live and recording applicationsthe sx fits all of these features into a rugged, compact frame with integral carry handle which can be optionally rack-mounted in to a 10u spaceexcellent condition including power supply, never gigged, light studio use onlyin the eq section, the classic british 3-band eq with swept mid benefits for custom designed pots which give greater control across carefully chosen frequencies

    170 €

  • output impedance: 3output mode: moving coilthe product is equipped with wireless receiver, wireless microphone, plug and play, very convenient directivity: single directivity

    20 €

  • output mode: moving coilthe product is equipped with wireless receiver, wireless microphone, plug and play, very convenient output impedance: 3transmission distance: ≤15mdirectivity: single directivity

    21 €

  • For sale used edge sub 900 watts output in fair condtion ÂŁ ono

    110 €

  • Kilo 1k pod system ÂŁ15 plus postage or collection available ask for availability kilo 1k key features 350mah battery draw-activated soft-touch finish for use with kilo 1k pods nicotine salt pods read more

    15 €

  • Bt elements 1k main base station only excluding power supply and line cordit is suitable for the bt elements 1k only (not original bt elements), base can support up to 5 elements 1k handsets in total registered to it

    19 €

  • Logitech zw speakers and sub woofer powerful for laptops with down firing subwoofer and pressure driver 35mm rca outputs power and volume control and jack output very good overall sound for any pc and has various sockets at back this is new and was over 70 pounds but selling as have new system reduced 30 not negotiable buyer to collect only this will go quick

    30 €

Did not find what you're looking for? Try again

Related searches sub output impedance 1k